Granito Microbeton

Product Description
It is a cement-based coating material that can be used for different decorative designs enriched with chemical additives.

Areas of Use
- It is used in the decorative design and production of wall and ceiling surfaces indoors.
- It can be applied on mineral surfaces such as black plaster, concrete, old painted surfaces and gypsum plaster, gypsum board by priming with Granito Primer product.
- It can also be used on difficult surfaces such as bathrooms and kitchens if surface protection is provided as specified in the application instructions.

Features and Advantages
- It is the perfect complement to interior decorations with its natural stone appearance.
- In addition to the wall in interiors, Granito Floor complements the floor application with Granito Floor, ensuring the integrity of the effect.
- It can be applied without removing the existing coating.
- Continuous application is possible.
- In addition to being a mineral coating, it has a flexible structure.
- The desired color can be obtained by coloring with colorants suitable for cementitious systems.
- Although it does not pass water from outside to inside, it allows buildings to breathe with its ability to expel the moisture inside.
- When Granito Varnish is applied to the surface, it is resistant to water.

Application Instructions
Surface Quality: The application surfaces should be cleaned from dust, dirt and oil that reduce adhesion, and should be completely cleaned from old and blistered paint layers and made dry, solid and clean. Wait at least 28 days for the surface to cure before applying on new mineral surfaces. All water isolation measures of the building must be taken. Old synthetic-based surfaces should be sanded thoroughly and sanding dust should be removed from the surface. If necessary, cracks on the surface should be filled with Teknorep 200.

Granito Travertino is one component. Granito Travertino is applied with a steel trowel in 2 or 3 coats, waiting between coats, on the surface prepared as specified in the application instructions. Total application thickness should be 2 - 4 mm. Granito Travertino pattern is applied with a steel trowel and/or an effect trowel. The gloss and pattern can be obtained by pressing hard with a trowel on the top coat application or by sanding after the top coat application. Other application methods can also be used. After the application is completed, Granito Polish should be applied to the entire surface according to the place and type of use.

Mixing: It is recommended to use a low-speed drill and mixer bit to ensure homogeneous mixing. Add the desired amount of water into the bucket according to the consistency, if coloring is desired, it is recommended to add the colorant to the mixing water. Then add the powder material slowly and continue mixing until a homogeneous mixture is obtained. The amount of mixing water may vary depending on the ambient temperature. Let the mortar rest for 1 - 3 minutes for the mortar to mature and mix again before application.

Application Notes / Limitations
- After application, the surface should be protected from water for one day. The product should not be cleaned with abrasive materials.