Product descriptionIt is a two-component epoxy paint that can be applied to concrete, metal, wood, plaster and gypsum and is resistant to severe service conditions and chemicals. For a textured surface, Teknobond 600 TIX should be used.
Fields of Application
- Indoor and outdoor locations,
- Constantly wet areas, areas where chemical agents are used
- in food factories.
- in laboratories, used on materials such as parquet, tiles, ceramics, mosaic, glass mosaic and porcelain.
- Also suitable for walls, ceilings and floor coverings/upholstery
Features and Benefits
- Waterproof.
- Resistant to chemicals and bacteria
- Frost resistant
- Long duration
- Hygienic, easy to clean
Application Instructions
Surface Quality: Surfaces must be clean, dry, solid and free of any foreign matter that may cause separation.
Surface Preparation: Surface roughnesses must be evened out and hollows must be filled in.
Compound: TEKNOBOND 600 is a two-component product. The proportionally prepared components A and B, which consist of a hardener and a resin, are mixed together using a low-speed mixer. Mixing is continued until a homogeneous mixture is obtained.
Application notes / Restrictions
- in self-application, a special filler is added and poured as needed; it is levelled with a trowel and combed with a spiked roller.
- in order to complete the hardening of the material, do not use it at the minimum allowable temperature. Low temperatures will slow the hardening process, while high temperatures will accelerate it. Pot life also varies with temperature.
- The product may irritate the skin. Protective goggles or gloves must be used. A protective hand cream must be used before starting work. If the soil mixture comes into contact with the eyes, eyes should be washed immediately with warm water and seek medical attention.
- The product may crystallize if kept for a long time below 0°C. If the crystals are broken when bringing the product back to room temperature, it can be used without any problem. Discoloration and yellowing may occur in the product that has hardened in direct sunlight. After application, the product must be protected against direct sunlight, strong winds, high temperatures (above +35 °C) and weather conditions such as rain and frost. In order to complete hardening and reaction shortly after application, areas in contact with the skin must be cleaned with water and detergent.
- Immediately after application, the equipment must be cleaned with Tekno Thinner before it hardens.
